Reich Industrie 500 DUO

2 Paralle Schiebetische

COMPLETELY MOVABLE TABLE TOP
-CE-certified and GS-tested
-Complies with accident prevention regulations
-removable safety feed (material pusher)
-separately covered saw blade in the operating area
-automatic switch-off and stop of the machine  when the wheel covers are opened.
-firmly welded table for better cleaning
-stable table with hygienically designed reinforcements
Built-in wheel scrapers - can be changed without tools
saw blade guide made of wear-resistant material and  removable without tools.

-Gas spring tensioning of the saw blade, therefore always correct blade tension.
-All housing parts made of stainless steel.

-The cutting height is approx. 50 mm lower than the standard Industry 500 machine.
-The table top forms the support for the telescopic table.

Schiebetisch mit teleskop-Führung

telescopic table.
-A stable guide unit is formed by corresponding tubes.
-A 30 mm thick solid stainless steel shaft is mounted on this guide unit.
-The table is guided by this shaft and can also be rotated or folded up for cleaning.
 around this shaft for cleaning.
 In addition, two ball bearings roll on this shaft
 and 4 each on the machine housing.
-Reinforcements are completely welded to the sliding table.
-The hand guard of the sliding table can be folded down,
 to achieve a flat table surface accessible from all sides.
-When the hand guard is folded down, the sliding table can no longer be moved.
be moved.
-Special dimensions can be realized at an extra charge.

-Rim guided by shelves in wheels, therefore no jumping down
 jumping down possible.
Self-supporting stainless steel housing
-Portion stop removable without tools
-Machine construction without the use of silicone,
 therefore also absolutely hygienic in the future.
-Electronic wear-free motor brake.

Kompakte Ausführung

-Switch monitoring center for safety solenoids.
-Safety magnets in separate plastic housing
-Large ergonomic bow handles for opening the doors.
-Stainless steel chip box
-5 m connection cable with phase inverter plug
-easy to maintain electrics - with standard components!
For three-phase current : 230/400 V / 50 Hz.
Connected load : 3.0 kW
Speed : 1500 / min.
Table dimensions : 880 x 900 mm
Table height : 950 mm
Cutting speed : approx. 40 meters / second
Cutting width : 480 mm
Cutting height : approx. 445 mm
Belt length : 3800 x 16 x 6 x 0.5 mm
Housing : stainless steel
External dimensions : 880 x 1010 x 2000 mm
Net weight : 395 kg
Gross weight : 410 kg on pallet.